LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1993 >> Forward Control 7.4 N >> Repair and Diagnosis (Single Page) >> Suspension >> Rear Suspension >> Suspension - Rear - P Series Trucks >> Removal & Installation >> Stabilizer Shaft >> Removal

Stabilizer Shaft: Removal

  1. Raise and support vehicle
  2. Remove nuts (105), washers (106), bolts (111) and brackets (110). See Fig 1 .
  3. Remove stabilizer shaft (108) from the anchor plates (107).
  4. Remove nuts (105), washers (106), bolts (111) and the brackets (110).
  5. Remove insulators (109) from the stabilizer shaft (108).
Fig 1: Identifying Rear Stabilizer Shaft Attachments
G00132795Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals