LEMON Manuals: Even more car manuals for everyone

Home >> GMC >> 1993 >> Forward Control 7.4 N >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 5.7L V8 - VIN [K] >> Removal & Installation >> Front Cover Oil Seal >> Removal

Front Cover Oil Seal: Removal

Remove accessory drive belt(s) and pulley. Remove crankshaft damper bolt. Using Damper Puller/Installer (J-39046), remove crankshaft damper. Pry seal from cover.

scientia non olet · About LEMON Manuals