LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1993 >> Forward Control 7.4 N >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Drive Axle - DANA 9.75", 10.5" & 11" (Full-Floating) >> Removal & Installation >> Rear Axle Housing Assembly >> Removal

Rear Axle Housing Assembly: Removal

  1. Raise and support vehicle. Drain lubricant. Remove drive shaft and wheel assemblies.
  2. Remove hub and drum assembly or hub and rotor assembly. See HUB & DRUM ASSEMBLY  or HUB & ROTOR ASSEMBLY  . Disconnect parking brake cable from lever and at brake flange plates. Remove hydraulic brake lines. Detach height-sensing/brake proportioning valve linkage (if equipped). Remove shock absorbers.
  3. Remove stabilizer bar (if equipped). Disconnect hose from axle vent fitting (if equipped). Support rear axle assembly. Remove leaf spring "U" bolt nuts. Lower rear axle assembly. Remove from under vehicle.
scientia non olet · About LEMON Manuals