BRAVADA, Jimmy, SONOMA, Typhoon & "T" Series Blazer & Pickup
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 1993 Oldsmobile Bravada, 1993 GMC Yukon, 1993 GMC Suburban, 1993 GMC Sonoma, and 1993 GMC Safari. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS (BRAVADA, JIMMY, SONOMA, TYPHOON & "T" SERIES BLAZER & PICKUP)
| Application |
Ft. Lbs. (N.m) |
| Ball Joint-To-Control Arm Nuts |
17 (23) |
| Ball Joint-To-Steering Knuckle Nut |
| Lower |
83 (112) |
| Upper |
61 (83) |
| Drive Axle Shaft Nut |
181 (245) |
| Hub & Bearing/Shield-To-Steering Knuckle Bolts |
86 (117) |
| Lower Control Arm-To-Frame Pivot Bolts |
148 (201) |
| Lower Control Arm-To-Frame Pivot Bolt Nuts |
92 (125) |
| Shock Absorber Nuts |
54 (73) |
| Stabilizer Bar Clamp-To-Frame Bolts |
35 (47) |
| Stabilizer Bar-To-Lower Control Arm Bolts |
24 (33) |
| Tie Rod End-To-Steering Knuckle Nut |
35 (47) |
| Torsion Bar Retainer-To-Support Bolts |
26 (35) |
| Torsion Bar Retainer-To-Support Nut |
25 (34) |
| Upper Control Arm-To-Frame Pivot Bolt Nuts |
70 (95) |