Lower Ball Joint: Installation
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 1993 Oldsmobile Bravada, 1993 GMC Yukon, 1993 GMC Suburban, 1993 GMC Sonoma, and 1993 GMC Safari. However, it is still accessible from the selected car via links, so may be relevant.
To install, reverse removal procedure. Use NEW nuts and bolts to install ball joints to lower control arm. Lubricate NEW ball joint. Tighten bolts and nuts to specification. See appropriate TORQUE SPECIFICATIONS table at the end of this article. Lower vehicle. Check wheel alignment and adjust ride height. See SPECIFICATIONS & PROCEDURES article in WHEEL ALIGNMENT.