LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1993 >> C3500 HD 5.7 K, Automatic >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Drive Axle - DANA 9.75", 10.5" & 11" (Full-Floating) >> Removal & Installation >> Axle Shafts >> Removal

Axle Shafts: Removal

  1. Raise and support vehicle. Remove axle flange bolts. See Figure. Using a soft-faced hammer, loosen axle shaft from hub.
  2. Using locking pliers, twist flange to unseat axle shaft from splines and hub studs (if equipped). Remove axle shaft from axle tube.
scientia non olet · About LEMON Manuals