Drive Axle Assembly Specifications

DRIVE AXLE ASSEMBLY SPECIFICATIONS ⁽¹⁾

Application

Specifications

Ring Gear Backlash

.005-.009" (.13-.23 mm)

Pinion Bearing Preload ⁽²⁾

9 3/4" Axles

20-40 INCH lbs. (2.26-4.53 N.m)

10 1/2" & 11" Axles

6-8 INCH lbs. (.68-.90 N.m)

⁽¹⁾	Adjustment shims are available in .003" (.08 mm), .005" (.13 mm), .010" (.25 mm) and .030" (.76 mm) thicknesses.

⁽²⁾	Measurement is without differential and with NEW bearings and seals.