Crankshaft Main Oil Seal: Remove & Replace
Includes: Pack and add only for Upper Rope Seal. If necessary to replace Upper Rope Seal, use Crankshaft - R&R.
NOTE: The manufacturer has determined that replacement rope and split lip type seals may be ineffective in early 1.8L, 2.0L Four and 2.8L V6 engines. Please read tariff notes carefully.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
| G1500,V6,Automatic Trans,Trans Mfr CD 4L60/MD8, Rear | Includes: R&I Transmission Assembly and Flywheel. | 3.8 | | B |
| Additional Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Where Cruise Control interferes add | | 0.2 | | B |
| Where Elect Eng System interferes add | | 0.5 | | B |