Brake Shoes &/Or Pads: Remove & Replace

Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
All		2.2		B
Front		1.0	0.9	B
Rear		1.4	0.9	B
Combination Procedure: AXLE BEARING: Replace:
Rear,Both		0.8		B
Rear,One Side		0.6		B
Combination Procedure: AXLE SEAL: Replace: Semi-Floating Axle.
Rear,Both		0.7		B
Rear,One Side		0.5		B
Combination Procedure: BRAKE HOSE: Replace:
2-Wheel ABS, Each Additional	Includes: Bleed Brakes.	0.2		B
2-Wheel ABS, One	Includes: Bleed Brakes.	0.7		B
Combination Procedure: CALIPER: Overhaul:
2-Wheel ABS, One	Includes: Bleed Brakes.	0.7		B
Combination Procedure: CALIPER: Replace:
2-Wheel ABS, One	Includes: Bleed Brakes.	0.6		B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
		0.5		B
Combination Procedure: DISC ROTOR: Remove and Install for Refinishing:
RWD, Each	Includes: Repack Wheel Bearings.	0.6		B
Combination Procedure: DISC ROTOR: Replace:
RWD, Each	Includes: Repack Wheel Bearings.	0.6		B
Combination Procedure: DRUM: Replace:
Each		0.1		B
Combination Procedure: WHEEL BEARING: Repack: Both Sides.
RWD, Front		0.6		B
Combination Procedure: WHEEL BEARING: Replace:
RWD, Front,One Side	Includes: Repack Wheel Bearings.	0.8		B
Combination Procedure: WHEEL CYLINDER: Overhaul:
2-Wheel ABS, One,Off Vehicle	Includes: Bleed Brakes.	0.9		B
2-Wheel ABS, One,On Vehicle	Includes: Bleed Brakes.	0.6		B
Combination Procedure: WHEEL CYLINDER: Replace:
2-Wheel ABS, One	Includes: Bleed Brakes.	0.7		B