LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1992 >> Forward Control 5.7 K, Standard >> Repair and Diagnosis (Single Page) >> Suspension >> Rear Suspension >> Suspension - Rear - P Series >> Removal & Installation >> Stabilizer Shaft >> Removal

Stabilizer Shaft: Removal

  1. Raise and support vehicle
  2. Remove stabilizer shaft (108) from frame. See Fig 1 .
  3. Remove nuts (105), washers (106), bolts (111) and clamp (110).
  4. Remove stabilizer shaft (108) from the anchor plates (107).
  5. Remove nuts (105), washers (106), bolts (111) and the clamps (110).
  6. Remove insulators (109) from the stabilizer shaft (108).
Fig 1: Identifying Rear Stabilizer Attachments
G00132790Courtesy of GENERAL MOTORS CORP.