LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1992 >> Forward Control 5.7 K, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 6.2L V8 Diesel - VIN [J] >> Removal & Installation >> Camshaft >> Installation

Removal & Installation: Camshaft: Installation

  1. If replacing camshaft bearings, see CAMSHAFT BEARINGS under REMOVAL & INSTALLATION. Coat camshaft journals with engine oil and lobes with High Viscosity Oil/Zinc (12345501). Install camshaft. Install thrust spacer with inside chamfer toward camshaft. Install thrust plate.
  2. Ensure camshaft end play is .002-.012" (.05-.31 mm). Install camshaft sprocket and timing chain, ensuring timing marks are aligned. See Figure . To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals