LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1992 >> Forward Control 5.7 K, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 6.2L V8 Diesel - VIN [J] >> Removal & Installation >> Camshaft Bearings >> Removal

Camshaft Bearings: Removal

Remove rear camshaft plug. Remove inner camshaft bearings using Bearing Remover/Installer (J-6098-01) and Adapter(J-6098-10). Rear inner bearing must be removed with pilot fitted in rear camshaft bearing. Remove front and rear camshaft bearings.

CAUTION: Camshaft bearing bores are different sizes. Install bearings with bearing seam in upper half of bore (cylinder block). Install front bearing with notch on bearing facing front of cylinder block. Front bearing contains 2 oil holes. Ensure oil holes in all bearings align with oil holes in block.
scientia non olet · About LEMON Manuals