LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1992 >> Forward Control 5.7 K, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 5.0L (305") V8 - VIN [H] >> Removal & Installation >> Intake Manifold >> Removal

Intake Manifold: Removal

  1. Release fuel system pressure. See FUEL PRESSURE RELEASE  under REMOVAL & INSTALLATION. Disconnect battery. Drain cooling system. Remove air cleaner.
  2. Disconnect fuel lines, electrical connectors, vacuum hoses, coolant hoses and control cables as necessary. Remove alternator bracket, A/C compressor (with hoses attached), injection unit and cruise control servo as necessary.
  3. Remove distributor cap. Mark distributor rotor in relation to distributor housing. Mark base of distributor housing in relation to intake manifold. Remove distributor. Remove intake manifold bolts, intake manifold and gaskets.
scientia non olet · About LEMON Manuals