LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1992 >> Forward Control 5.7 K, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 5.0L (305") V8 - VIN [H] >> Overhaul >> Cylinder Block Assembly >> Rod Bearings

Rod Bearings

  1. Measure rod bearing journal out-of-round, taper and oil clearance. If measurement is not within specification, replace rod bearings and/or machine crankshaft. See CRANKSHAFT, MAIN & CONNECTING ROD BEARINGS table under ENGINE SPECIFICATIONS at end of article.
  2. Ensure rod side play is within specification. See CONNECTING RODS table under ENGINE SPECIFICATIONS at end of article.
scientia non olet · About LEMON Manuals