LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1992 >> Forward Control 5.7 K, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System - Electric Motor Servo >> Testing >> Sierra, Suburban, YUKON & "C" & "K" Series Blazer & Pickup >> Cruise Control Does Not Disengage Using Brake Or Clutch Pedal

Cruise Control Does Not Disengage Using Brake Or Clutch Pedal

  1. Ensure GAGES fuse is okay. Turn ignition switch to RUN position. Turn on cruise control. While depressing brake pedal, check for battery voltage at Brown wire terminal of brake switch connector.
  2. If battery voltage is not present, replace cruise control module. If battery voltage is present, adjust brake switch. See BRAKE & CLUTCH RELEASE SWITCHES  under ADJUSTMENTS. Replace brake switch if it cannot be adjusted. On vehicles with manual transmission, go to next step.
  3. While depressing clutch pedal, check for battery voltage at Brown wire terminal of clutch switch connector. If battery voltage is not present, replace cruise control module. If battery voltage is present, adjust clutch switch. See BRAKE & CLUTCH RELEASE SWITCHES  under ADJUSTMENTS. Replace clutch switch if it cannot be adjusted.
scientia non olet · About LEMON Manuals