Code 39, TCC Circuit 3.3L & 3.8L With 4T60 (440-T4) Transaxle: Notes

Fig 1: Code 39, TCC Circuit Diagram (3.3L A Body W/4T60 Transaxle)

Courtesy of GENERAL MOTORS CORP.

Fig 2: Code 39, TCC Circuit Diagram (3.8L C & E Bodies W/4T60 Transaxle)

Courtesy of GENERAL MOTORS CORP.

Fig 3: Code 39, TCC Circuit Diagram (3.8L H Body W/4T60 Transaxle)

Courtesy of GENERAL MOTORS CORP.

Fig 4: Code 39, TCC Circuit Diagram (3.8L W Body W/4T60 Transaxle)

Courtesy of GENERAL MOTORS CORP.

Code 39 will set when no Code 28 or 29 is set, brake is not applied, TCC is commanded by ECM, transmission is in high gear and engine speed-to-vehicle speed ratio does not indicate TCC has engaged. All these conditions must have been bet for more than 15 seconds.

1. Tests fuse, brake switch and battery power circuit to the TCC solenoid.
2. Tests for ECM driver operation at TCC harness connector.
3. Tests for ECM driver operation at ECM terminal.