Bushing Replacement (G25/2500 6.2L Diesel)
- Remove lower control arm. See LOWER CONTROL ARM . Remove nuts and washers from control arm shaft.
- Use Control Arm Bushing Set (J-24435-A
) for bushing replacement. Using Removers (J-24435-1
and J-24435-3
) and "C" Clamp (J-24435-7
), remove one bushing from control arm. See Fig 1. Remove control arm shaft. Repeat procedure to remove remaining bushing.
- To install bushings, use Installers (J-24435-4
and J-24435-5
) and "C" Clamp (J-24435-7
). See Fig 2. Install one bushing. Install control arm shaft, and repeat procedure to install remaining bushing. Install lower control arm.
Courtesy of GENERAL MOTORS CORP.
Courtesy of GENERAL MOTORS CORP.