Heated Oxygen Sensor (Ho2S)
WARNING: This page is about a different car, the 1995 Dodge Ram Wagon, 1995 Dodge Ram Van, 1995 Dodge Pickup, and 1995 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
To test heating element, measure resistance between the 2 White wire terminals on sensor. Ohmmeter reading should be 5-7 ohms. If ohmmeter does not indicate 5-7 ohms, replace HO2S. To test sensing circuit, see TESTS W/CODES - 5.9L GASOLINE article in the ENGINE PERFORMANCE section.