LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1991 >> Value Van 7.4 N >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Engine Controls - System/Component Tests - 5.9L Gasoline) >> Engine Sensors & Switches >> Crankshaft Position (CKP) Sensor

Crankshaft Position (CKP) Sensor

WARNING: This page is about a different car, the 1995 Dodge Ram Wagon, 1995 Dodge Ram Van, 1995 Dodge Pickup, and 1995 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. CKP sensor is located in transmission bellhousing near flywheel.
  2. Disconnect CKP sensor connector from main wiring harness. Measure resistance across CKP sensor wiring connector terminals "B" and "C". See Fig 1 . Replace CKP sensor if any resistance exists.
Fig 1: CMP & CKP Sensor Connector Terminal ID (All Models)
G92C22238Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals