Replacing Terminals
WARNING: This page is about a different car, the 1995 Plymouth Voyager, 1995 Plymouth Grand Voyager, 1995 Dodge Grand Caravan, 1995 Dodge Caravan, and 1995 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
Using a Super Crimp FT (29564) tool, strip about 1/4" (1/8" on pin header terminals) of insulation to allow terminal wire grips to cover wire strands. Crimp and apply 60/40 rosin core solder to grip area of terminal. See Fig 1 .