LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1991 >> Value Van 7.4 N >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Air Bag Restraint System) >> Removal & Installation >> Driver-Side Air Bag Module & Steering Wheel >> Removal

Driver-Side Air Bag Module & Steering Wheel: Removal

WARNING: This page is about a different car, the 1995 Plymouth Voyager, 1995 Plymouth Grand Voyager, 1995 Dodge Grand Caravan, 1995 Dodge Caravan, and 1995 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see SERVICE PRECAUTIONS. Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. Driver-side air bag module is mounted on face of steering wheel. See Figure . Position wheels in straight ahead position. Remove cruise control switches (if equipped) and covers from steering wheel back shroud, and disconnect wires.
  3. Remove air bag module retaining bolts/nuts from rear of steering wheel. Lift air bag module from steering wheel, and disconnect electrical connector. Remove air bag module. Using Puller (C3428B), remove steering wheel.