Driver-Side Air Bag Module & Steering Wheel: Installation
WARNING: This page is about a different car, the 1995 Plymouth Voyager, 1995 Plymouth Grand Voyager, 1995 Dodge Grand Caravan, 1995 Dodge Caravan, and 1995 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
- If replacing a deployed air bag module, replace clockspring. See CLOCKSPRING. Position steering wheel on steering column. Ensure flats on steering wheel hub fit formations on inside of clockspring.
- Ensure wires do not get pinched under steering wheel. Install steering wheel retaining nut and tighten to specification. See TORQUE SPECIFICATIONS.
- Connect air bag module wire to air bag module. Install air bag module, and tighten bolts to specification. Connect cruise control wires to switches. Install switches.