LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1991 >> Value Van 7.4 N >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Air Bag Restraint System) >> Removal & Installation >> Air Bag Control Module (ACM) >> Removal

Air Bag Control Module (ACM): Removal

WARNING: This page is about a different car, the 1995 Plymouth Voyager, 1995 Plymouth Grand Voyager, 1995 Dodge Grand Caravan, 1995 Dodge Caravan, and 1995 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, follow air bag service precautions. See SERVICE PRECAUTIONS. Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. ACM is located behind floor console. See Fig 1 . Remove 2 floor console-to-instrument panel support bracket bolts. Slide cup holder out. Remove 2 upper console retaining screws behind cup holder.
    Fig 1: Removing ACM
    G94G43253Courtesy of CHRYSLER CORP.
  3. Remove console by sliding console rearward and up. Remove ACM mounting screws. Disconnect ACM connectors and remove ACM.