Fuel Line Disconnect Fitting: Installation
WARNING: This page is about a different car, the 1995 Plymouth Grand Voyager, 1995 Dodge Grand Caravan, and 1995 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure plastic ring is in outward position (away from disconnect fitting). If plastic ring is in inward position (toward disconnect fitting), disconnect fitting must be replaced.
- Lubricate end of fuel line with 30W engine oil. Insert fuel line into disconnect fitting until shoulder on fuel line locks in place.CAUTION: After installing fuel line in disconnect fitting, pull on fuel line and disconnect fitting to ensure fuel line is locked in place.
- Pull on fuel line and disconnect fitting to ensure fuel line is locked in place. If fuel line is not locked in place, ensure plastic ring is not causing locking retainer to remain in the released position. Reconnect negative battery cable. Start engine and check for leaks.