Installation-3.3/3.8L Engines
WARNING: This page is about a different car, the 1995 Plymouth Grand Voyager, 1995 Dodge Grand Caravan, and 1995 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
Place a new gasket (dipped in water) on the water box surface, center thermostat into opening in the intake manifold. Place housing over gasket and thermostat, making sure thermostat is in recess provided (Fig 1). Bolt housing to intake manifold, tighten bolts to 28 N.m (250 in. lbs.). Refill cooling system.