Rocker Arms & Push Rods: Installation
WARNING: This page is about a different car, the 1995 Plymouth Voyager, 1995 Plymouth Grand Voyager, 1995 Dodge Grand Caravan, and 1995 Dodge Caravan. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure push rods are seated in valve lifters. Install rocker arm assembly in original location. Ensure steel retainers are located on bolt area of rocker arm shafts.
- Slowly tighten rocker arm shaft bolts to specification, starting at center and working outward. See TORQUE SPECIFICATIONS . To install remaining components, reverse removal procedure.