Removal & Installation: Camshaft: Installation
WARNING: This page is about a different car, the 1995 Plymouth Voyager, 1995 Plymouth Grand Voyager, 1995 Dodge Grand Caravan, and 1995 Dodge Caravan. However, it is still accessible from the selected car via links, so may be relevant.
- Lubricate camshaft with camshaft lubricant. Install camshaft. Install and tighten camshaft thrust plate bolts to specification. See TORQUE SPECIFICATIONS .
- Ensure camshaft end play is within specification. Replace camshaft thrust plate if camshaft end play is not within specification. See CAMSHAFT SPECIFICATIONS table under ENGINE SPECIFICATIONS.
- To install remaining components, reverse removal procedure. Ensure components are installed in original location.