LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1991 >> Value Van 7.4 N >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (3.3L V6 CNG - VIN [J]) >> Engine Oiling >> Oil Pump >> Reassembly & Installation

Reassembly & Installation

WARNING: This page is about a different car, the 1995 Plymouth Voyager, 1995 Plymouth Grand Voyager, 1995 Dodge Grand Caravan, and 1995 Dodge Caravan. However, it is still accessible from the selected car via links, so may be relevant.
  1. To reassemble, reverse disassembly procedure. Ensure inner rotor is installed with chamfered side of rotor facing the pump cover. Tighten pump cover bolts to specification. See TORQUE SPECIFICATIONS . Install NEW pressure relief valve retainer cap.
  2. Fill rotor cavity with engine oil before installing. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals