Intake Manifold: Inspection
WARNING: This page is about a different car, the 1995 Plymouth Voyager, 1995 Plymouth Grand Voyager, 1995 Dodge Grand Caravan, and 1995 Dodge Caravan. However, it is still accessible from the selected car via links, so may be relevant.
Inspect for clogged coolant passages in end crossovers. Check intake manifold mounting surfaces for warpage. Ensure warpage does not exceed specification. See INTAKE MANIFOLD WARPAGE table.
INTAKE MANIFOLD WARPAGE
| Application | In. (mm) | |
|---|---|---|
| Cylinder Head Mounting Surface | ||
| Standard | .003 (.08) | |
| Maximum | .005 (.13) | |
| Upper Air Intake Mounting Surface | ||
| Standard | .004 (.10) | |
| Maximum | .008 (.20) | |