LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1991 >> Value Van 7.4 N >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (3.0L V6 - VIN [3]) >> Removal & Installation >> Camshaft >> Installation

Removal & Installation: Camshaft: Installation

WARNING: This page is about a different car, the 1995 Plymouth Voyager, 1995 Plymouth Grand Voyager, 1995 Dodge Grand Caravan, and 1995 Dodge Caravan. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Lubricate camshaft with engine oil before installing. Ensure proper procedure is used when installing rocker arms, as camshaft bearing caps must be properly installed. See ROCKER ARM & VALVE LASH ADJUSTER  under REMOVAL & INSTALLATION.

scientia non olet · About LEMON Manuals