Cylinder Block Specifications

WARNING: This page is about a different car, the 1995 Plymouth Voyager, 1995 Plymouth Grand Voyager, 1995 Dodge Grand Caravan, and 1995 Dodge Caravan. However, it is still accessible from the selected car via links, so may be relevant.

CYLINDER BLOCK

Application

In. (mm)

Cylinder Bore

Standard Diameter

3.587 (91.10)

Maximum Taper & Out-Of-Round

.0008 (.020)

Maximum Deck Warpage

⁽¹⁾ .002 (.05)

⁽¹⁾	Service limit is .0039" (.100 mm). Combined maximum total grind limit of cylinder head and cylinder block is .008" (.20 mm).