Removal & Installation (Pickup Diesel)
WARNING: This page is about a different car, the 1995 Dodge Ram Wagon, 1995 Dodge Ram Van, 1995 Dodge Pickup, and 1995 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable. Remove generator drive belt. Remove B+ terminal nut, field terminal nuts and ground/wire harness hold-down nuts. Remove wire connectors.
- Remove generator upper mounting bolt and nut. Remove generator lower mounting bolt. Remove generator from vehicle. To install, reverse removal procedure. Tighten lower mounting bolt first, then tighten upper mounting bolts. See TORQUE SPECIFICATIONS table.