Throttle Position Sensor (TPS): Installation
WARNING: This page is about a different car, the 1995 Dodge Pickup and 1995 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Install TPS on throttle lever bracket with electrical connector on TPS facing downward. The TPS is spring loaded and must be rotated counterclockwise until bolt holes are aligned when installing on throttle lever bracket.
- Rotate TPS counterclockwise until bolt holes are aligned. Install and tighten bolts. Reinstall electrical connector. Operate throttle and check for binding in throttle linkage. Check TPS adjustment. See THROTTLE POSITION SENSOR (TPS) in ADJUSTMENTS - 5.9L DIESEL article in the ENGINE PERFORMANCE section.