LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1991 >> Value Van 7.4 N >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Engine Controls - Remove/Install/Overhaul - 5.9L Diesel) >> Sensors & Switches >> Park/Neutral Switch >> Installation

Park/Neutral Switch: Installation

WARNING: This page is about a different car, the 1995 Dodge Pickup and 1995 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply parking brake. Place gearshift in Park. Ensure park/neutral switch operating levers in transmission are centered in the park/neutral switch opening on transmission case.
  2. Using NEW seal ring, install park/neutral switch. Tighten park/neutral switch to specification. See TORQUE SPECIFICATIONS . Install electrical connector.
scientia non olet · About LEMON Manuals