LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1991 >> Value Van 7.4 N >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Engine Controls - Remove/Install/Overhaul - 5.9L Diesel) >> Fuel System >> Intake Air Heater >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 1995 Dodge Pickup and 1995 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cables. Remove oil dipstick tube bracket from air inlet housing. Disconnect air intake heater electrical connectors. Remove bolts, air inlet housing and gasket. Remove air intake heater and gasket.
  2. To install, reverse removal procedure using NEW gaskets. Tighten air inlet housing bolts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals