Removal & Installation
WARNING: This page is about a different car, the 1995 Dodge Pickup and 1995 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cables. Remove starter. Disconnect electrical connector at fuel heater. Fuel heater is located below fuel filter/water separator. See Figure.
- Unscrew prefilter from fuel heater. Prefilter is located on bottom of fuel heater and contains a hex area which can be used for removal and installation of prefilter. Remove fuel heater from housing. To install, reverse removal procedure.