LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1991 >> Value Van 7.4 N >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Engine Controls - Basic Testing - 5.9L Gasoline) >> Preliminary Inspection & Adjustments >> Mechanical Inspection >> Compression

Mechanical Inspection: Compression

WARNING: This page is about a different car, the 1995 Dodge Ram Wagon, 1995 Dodge Ram Van, 1995 Dodge Pickup, and 1995 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Check engine mechanical condition using a compression gauge, vacuum gauge, or an engine analyzer capable of performing a relative compression test. See engine analyzer instruction manual for availability and description of relative compression feature.

Check engine compression with engine at normal operating temperature and specified cranking speed, all spark plugs removed, and throttle wide open.

COMPRESSION SPECIFICATIONS

Application Specification
Compression Ratio 9.1:1
Minimum Compression Pressure (1) 100 psi (690 kPa)
(1) Maximum difference between each cylinder is 25 psi (172 kPa).