Test VER-1A - No Start VERIFIC Test
WARNING: This page is about a different car, the 1995 Dodge Pickup and 1995 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure all engine components are connected. Reassemble and reconnect components as necessary. Inspect engine for contamination. Change engine oil and filter if necessary.
- Attempt to start engine. If engine does not start, check if any Technical Service Bulletins (TSBs) apply and return to TEST TC-1A as necessary.
- If engine starts and PCM has been changed, connect scan tool to data link connector. Erase DTCs. Repair is complete.