LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1991 >> Value Van 7.4 N >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Engine Controls - Adjustments - 5.9L Diesel) >> Adjustments >> Fuel Shutdown Solenoid >> Solenoid Shaft Adjustment

Solenoid Shaft Adjustment

WARNING: This page is about a different car, the 1995 Dodge Pickup and 1995 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition on. Pull upward and hold solenoid lever in the upward position. See Fig 1 . If solenoid is operating correctly, solenoid lever should remain in upward position with ignition on.
  2. Measure distance from bottom of mounting bracket to end of the lever pin. See Fig 2 . Distance should be 2.64" (67. mm). If distance is incorrect, loosen shaft lock nut and rotate adjustment nut until correct distance is obtained. See Fig 2 . Tighten shaft lock nut and recheck the distance.
Fig 1: Identifying Fuel Shutdown Solenoid & Solenoid Lever
G94I65456Courtesy of CHRYSLER CORP.
Fig 2: Measuring & Adjusting Fuel Shutdown Solenoid Shaft Distance
G94J65457Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals