Test NS-8A - Correcting Start & Stall Condition

WARNING: This page is about a different car, the 1995 Dodge Ram Wagon, 1995 Dodge Ram Van, 1995 Dodge Pickup, and 1995 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

Engine controller systems are operating properly and are not cause of driveability problem. Perform following additional checks to help identify a possible no-start condition problem. DO NOT overlook any of following conditions. Any of these conditions may produce a no-start condition. Check all related Tech Service Bulletins (TSBs) and perform corrective action as necessary.

Engine valve timing (must be within specification).
Engine compression (must be within specification).
Engine exhaust system (must be free of restrictions).
Engine PCV system (must flow freely).
Engine drive sprocket (must be properly positioned).
Fuel (must be free of contamination).
Engine secondary ignition check (must exhibit a normal scope pattern).