LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1991 >> Value Van 7.4 N >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Engine Controls - Tests W/Codes - 5.2L CNG) >> DTC & Fault Codes/Messages >> DTCS/MESSAGES (Note: For DTC table, see TEST TC-1A under "Self-Diagnostic Tests.") >> Code 11

Code 11

WARNING: This page is about a different car, the 1995 Dodge Ram Wagon, 1995 Dodge Ram Van, 1995 Dodge Pickup, and 1995 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

Scan tool displays NO CRANK REFERENCE SIGNAL AT PCM. Condition is: no reference signal from crankshaft position sensor picked up during cranking.

scientia non olet · About LEMON Manuals