Test NS-8A - Correcting Start & Stall Condition
WARNING: This page is about a different car, the 1995 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
At this point in diagnostic test procedure, all engine electrical systems have been determined to be operating as designed and not causing a start and stall problem. Check following additional items for possible causes.
- Check if any Technical Service Bulletins (TSB) apply to vehicle.
- Check engine compression.
- Check for exhaust system restriction.
- Check camshaft and crankshaft sprockets.
- Check valve timing.
- Check for fuel contamination.
- Check secondary ignition system.
- Ensure PCV system is functioning properly.