LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1991 >> Value Van 7.4 N >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Air Bag Restraint System) >> Adjustments >> CLOCKSPRING Centering

CLOCKSPRING Centering

WARNING: This page is about a different car, the 1995 Dodge Ram Wagon and 1995 Dodge Ram Van. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: If rotating part of clockspring is not positioned properly with steering column and front wheels, clockspring failure may result. Use following procedure to center clockspring.
  1. Before proceeding, see SERVICE PRECAUTIONS. Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. With steering wheel removed, depress 2 plastic auto-locking tabs to release locking mechanism. See Figure .
  3. Keeping locking mechanism disengaged, rotate clockspring rotor clockwise to end of its travel. DO NOT apply excessive torque. From end of its travel, rotate rotor 2 1/2 turns in counterclockwise direction.
  4. Horn wire should end up at top and air bag module wire (squib wire) at bottom. See Figure . Engage clockspring locking mechanism.
  5. DO NOT connect negative battery cable at this time. Perform system operation check to ensure system is functioning properly. See SYSTEM OPERATION CHECK.
scientia non olet · About LEMON Manuals