Removal (NP 231 & NP 241)
WARNING: This page is about a different car, the 1994 Dodge Pickup, 1994 Dodge Dakota, and 1994 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support vehicle. Remove skid plate (if equipped). Mark drive shafts and "U" joints for reassembly reference. Disconnect distance sensor wires and speedometer cable (if equipped). Disconnect harness wires and vent hose from transfer case.
- Disconnect shift linkage from operating lever. Remove linkage and bracket, and position aside. Remove transfer case-to-transmission housing nuts. Using transmission jack, support transfer case. With an assistant, move transfer case rearward and tilt to avoid crossmember during removal from vehicle.