NP 241

WARNING: This page is about a different car, the 1994 Dodge Pickup, 1994 Dodge Dakota, and 1994 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Place shift lever into 2H position. Raise and support vehicle. Loosen shift rod lock bolt at trunnion. See Fig 1. Ensure shift rod fits in trunnion and does not bind.
With shift lever still in 2H position, tighten shift rod lock bolt to 90 INCH lbs. (10 N.m). Lower vehicle. Verify proper operation in all ranges.

Fig 1: Adjusting Transfer Case Shift Linkage (NP 241)
Courtesy of CHRYSLER LLC