Installation (3.9L, 5.2L & 5.9L Except Diesel)
WARNING: This page is about a different car, the 1995 Dodge Pickup and 1995 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Connect sensor electrical connector, ensuring locking tab is engaged. Mount sensor with arrow pointing toward front of vehicle. Install sensor, using NEW screws provided, and tighten to specification. See TORQUE SPECIFICATIONS.
- To complete installation, reverse removal procedure. DO NOT connect negative battery cable at this time. Perform system operation check to ensure system is functioning properly. See SYSTEM OPERATION CHECK.