Voltmeter Reads 9 Volts Or Less
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1991 GMC Pickup, 1991 GMC Cab & Chassis, 1991 GMC C3500 HD, 1991 Chevrolet Pickup, and 1991 Chevrolet Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Measure voltage across battery terminals. Voltage should be about 12 volts. If battery is discharged, recharge battery, and perform load test. Repair cause of discharged battery.
- With ignition on and battery terminals cleaned and connected, observe voltmeter with battery charger in operation. Voltmeter gauge should read 12 volts or more. If gauge does not read 12 volts or more, check for high resistance in voltmeter gauge terminal connections. Clean and tighten connections.
- If voltmeter reading is still low, apply 12 volts directly to positive terminal of gauge. If voltmeter does not respond accurately, replace gauge.