LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1991 >> Value Van 7.4 N >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Engine Controls - System/Component Tests - 8.0L) >> Engine Sensors & Switches >> Park/Neutral Position Switch

Park/Neutral Position Switch

WARNING: This page is about a different car, the 1995 Dodge Pickup and 1995 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Park/neutral position switch is located on transmission. Turn ignition off. Put shift selector in Park position. Disconnect switch harness connector. Using ohmmeter, check continuity between switch center terminal and transmission case. Continuity should exist in Park and Neutral positions only.
  2. If continuity exists, switch is functioning properly. If continuity does not exist, check for correct adjustment. Replace switch if correctly adjusted.
scientia non olet · About LEMON Manuals