EGR System Operation Check
WARNING: This page is about a different car, the 1995 Dodge Pickup and 1995 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Warm engine to operating temperature. Check condition of all EGR system tubes, hoses and electrical connections.
- Start engine. Snap throttle to 2000-2800 RPM and check for EGR valve stem movement. If EGR stem moves, proceed to EGR GAS FLOW TEST. If no stem movement occurs, see TESTS W/CODES - 8.0L article in the ENGINE PERFORMANCE section for further testing procedures.