LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1991 >> Value Van 7.4 N >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brake System & Drum Brake System - RWD Trucks >> Removal & Installation >> Master Cylinder >> Removal

Master Cylinder: Removal

  1. Disconnect front and rear hydraulic brake lines at master cylinder, and cover ends to prevent entry of foreign matter.
  2. On vehicles without power assist units, disconnect brake pedal push rod at brake pedal. Remove master cylinder retaining bolts, and remove cylinder assembly from vehicle.
scientia non olet · About LEMON Manuals